Anyone care to share their most recent Alt recipe?
#1
Posted 01 May 2016 - 02:50 PM
#2
Posted 01 May 2016 - 03:00 PM
One of the guys I email back and forth with asked me if I had a good Alt recipe. It's not a style I have put a lot of work into so I'm checking in with BlKtRe and DJ (and everyone else) to see if they would share their latest, most-awesome alt recipes. I did send him some links to older threads but just checking to see if anything new is available. Thanks and cheers.
Brauer brews a lot of Alt/Alt-like beers, but the recipe forum isn't really where he hangs out.
#3
Posted 01 May 2016 - 03:26 PM
I can go back through my notes. Sadly I have not made on for a while. Well, one I was happy with. Made one with 1056 a while back. It was not worthy. I don't blame the yeast but it ended up being dumped.
Nothing new though if you found the old threads. I need to brew that style again. Been in a repetitive rut.
#4
Posted 01 May 2016 - 04:12 PM
I've got an Altbier-ish recipe I've been tinkering with; will be brewing within the month or so.
It will feature Liberty hops, along with a grain bill of Munich, some pils, and a dash of Carafa-3, so I don't know how authentic it will be (probably not very, at least in terms of the hops).
I will be brewing it this time with US-05 (no 1007 on hand), so I guess it will be an American Altbier, something or other.
#5
Posted 01 May 2016 - 04:46 PM
#6
Posted 01 May 2016 - 05:06 PM
#7
Posted 01 May 2016 - 05:31 PM
Thanks gang. I think this guy is looking for "authentic" and Chils, I was thinking that the ingredients in a Dunkel could work in an alt although the hops and yeast might be changed and it might not be as dark. Dark Munich, pilsner, some Carafa... what hops? Perle? A good, firm bitterness and then personal choice on hops later. 1007 would be my choice on yeast, personally. Thanks again.
I always thought spalt was the way to go for alt hops.
#8
Posted 01 May 2016 - 05:35 PM
I like a mix of pils and light munich + carafa spec for color. 1007 for the yeast for sure. never got around to trying spalt but I have also heard that is ideal for hops. as for me I just use german magnum and hallertau.
#9
Posted 01 May 2016 - 05:42 PM
I happen to have "Beer Styles from Around the World" by Horst Dornbusch here.
For Dusseldorfer he has a few recipes:
1)
63% pils
30% munich I
5% carared
2% carafa spec I
spalt at 60 and 10 mins.
2)
96% pils
2.5% caramunich I
1.5% carafa spec I
mittelfruh @ 60 min
perle @ 60 min
spalt @ 20 min
3)
72.5% pils
18.5 % munich II
9% wheat
mittelfruh @ 60
mittelfruh @ flameout
tettnanger @ whirlpool
he also has some for westphalian and sticke as well if anyone wants them. sorry I didn't include the hop amounts. they are in grams per hectoliter so I would want to convert them for you guys.
#10
Posted 01 May 2016 - 05:45 PM
#11
Posted 01 May 2016 - 05:47 PM
#12
Posted 01 May 2016 - 08:17 PM
#13
Posted 02 May 2016 - 06:38 AM
1)
63% pils
30% munich I
5% carared
2% carafa spec I
2)
96% pils
2.5% caramunich I
1.5% carafa spec I
3)
72.5% pils
18.5 % munich II
9% wheat
I recently brewed what amounts to recipe 2 most recently and have to say it was fine, but not as richly malty as I expect for the style. My previous batches had very high percentages of Munich and I have to say that they were overly malty. I believe that something along the lines of recipe 1 is going to be closer to what I expect in an Alt.
I do like using Spalt in Alt, but with the very low alphas that you can get that hop with, its probably not appropriate to try to get all your bittering with Spalt these days. You would end up with a huge amount of hop matter in the kettle and that can affect flavor. I suggest a small dose of Magnum to get much of the bittering needed for the style and then add appropriate doses of Spalt finishing hops.
#14
Posted 02 May 2016 - 09:05 AM
#15
Posted 02 May 2016 - 09:08 AM
I recently brewed what amounts to recipe 2 most recently and have to say it was fine, but not as richly malty as I expect for the style. My previous batches had very high percentages of Munich and I have to say that they were overly malty. I believe that something along the lines of recipe 1 is going to be closer to what I expect in an Alt.
I do like using Spalt in Alt, but with the very low alphas that you can get that hop with, its probably not appropriate to try to get all your bittering with Spalt these days. You would end up with a huge amount of hop matter in the kettle and that can affect flavor. I suggest a small dose of Magnum to get much of the bittering needed for the style and then add appropriate doses of Spalt finishing hops.
in the past I've done something close to recipe 1 although without the carared and with hallertau instead of spalt. I def agree on the bittering. I like to use something like magnum with a little hallertau mixed in.
I should also add there are notes with those recipes regarding step mashes and the like. if someone really wants to try one as specified let me know and I'll post the details.
#16
Posted 02 May 2016 - 09:21 AM
1 and 3 would seem to jive with more of what I remember tasting over there over 2. They were much less Munich driven than I would expect.
#17
Posted 02 May 2016 - 09:35 AM
I recently brewed what amounts to recipe 2 most recently and have to say it was fine, but not as richly malty as I expect for the style. My previous batches had very high percentages of Munich and I have to say that they were overly malty. I believe that something along the lines of recipe 1 is going to be closer to what I expect in an Alt.
I do like using Spalt in Alt, but with the very low alphas that you can get that hop with, its probably not appropriate to try to get all your bittering with Spalt these days. You would end up with a huge amount of hop matter in the kettle and that can affect flavor. I suggest a small dose of Magnum to get much of the bittering needed for the style and then add appropriate doses of Spalt finishing hops.
I agree with both points. I tried a 100% Munich altbier one time and it was way too malty. In addition, the Munich was a black hole for hops. So I think the Munich needs to be cut with some pils.
I also agree that Magnum or whatever your favorite clean bittering hops are should be used for bittering. If you want some hops character you can add your Spalt or whatever later in the boil.
Keller's alt recipe was very good as I recall. Mine is very similar to his and DJ's is good too.
#18
Posted 02 May 2016 - 03:07 PM
Mash 149°F and 158°F, 30 min. ea.
Hallertau, Perle, or Spalt. About 35 IBU, with an addition around 20 min.
OG of 1.048, FG of 1.009.
1007 is a great choice, but I usually use WLP011. Primary at 58-60°F, rising to mid-60's to finish. Refrigerate for 7-14 days, until clear. Serve.
Scaled for 80% efficiency:
8.5 lb Pilsner Malt
2.5 oz German CaraMunich III
1.75 oz Chocolate Wheat Malt
1 oz Perle (7.5%) - 60 min
1 oz Spalt (5.0%) - 20 min
I might not have that first addition exactly right, but you'll need to adjust that, anyway, and you'll need to adjust the Pilsner malt to your efficiency. A 2 min. addition is also nice. Color can behave quite differently between systems, when you are adding so little color malt, so no promises that will give you the color you want your Alt to be.
I also really like the same recipe with a pound or two of Munich malt swapped in, in which case I usually leave out the Caramunich.
#19
Posted 02 May 2016 - 03:07 PM
Duss Alt
62.5% Pils
26.8% Munich 10L
9% Caramunich III (57L)
1.7% Dehusked Carafa III (470L)
Single Infusion mash @ 150
39 IBU
Nugget @ 60 to 30IBU
Whatever Noble Hop I have available 9 IBU @ 20 Min
WYeast 1007 @ 56
I use the fast ferment method and start ramping temps on day 3 or 4 by 3 degrees per 12 hours until I get to 68. Then I let it finish there.
Won several gold medals with this recipe. It's fecking tasty, but you have to gel the shit out of it to get it to clear.
#20
Posted 02 May 2016 - 03:10 PM
Looks like me and Chils think alike...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users