So I have a couple of spunding valves I can use on my corny kegs. I bought them in the spring and will only get around to using them for the first time next week I'm guessing.
I was planning to rack my 10 gallons into two 5 gallon corny kegs towards the end of fermentation and put these valves on.
I'm figuring purging the kegs before racking isn't a huge deal here. I will purge post racking while I'm getting the lids to seal up.
I'm also accepting I'll have to work through more cloudy pints on these kegs but hopefully not too much more than normal.
I'm planning to do my dry hopping once I've cold crashed the kegs b/c I want get most of the yeast to drop out first.
Is there anything else I should know about this?