I have a blonde sour going in a 8gal barrel that I purchased from another brewer that was previously soured. I have sampled it using a very small skinny dropper as I didn't want to disturb the pellicle to much. It tastes really good and I am thinking it could be time to rack it into a keg. But I wanted to check the gravity and pH before I do. I need to draw off enough to do that but didn't know how much I can disturb the pellicle and the cons of that? I know I should have put a nail in the side, next time it's empty. Anyway can I use a wine thief or should I use something smaller like a SS racking cane?
Sour barrel racking and sampling
#1
Posted 26 June 2017 - 06:37 PM
#2
Posted 26 June 2017 - 10:22 PM
I use SS screws. Screw one in the head and sample away.
#3
Posted 27 June 2017 - 07:07 AM
Also assuming everything is good and I want to rack it to a keg. I shouldn't have to be concerned about disturbing it then correct? My plan was to keg 5gal leaving around 3gal behind, then fill it back up with fresh wort. At that point do I just stir it all back up pellicle and all?
#4
Posted 27 June 2017 - 08:14 AM
Why can't you go ahead and put the screw in the full barrel now? Its not an issue. If you are worried that it will leak around the screw have some beeswax handy, but you won't need it.
When I rack I just go ahead and pop my racking cane thru the pellicle. Get what I want then just add the raw wort back to the barrel. No stirring. The pellicle will reform so no worries. Try and keep the barrel as full as you can to reduce headspace. What you are doing is called the Solera method. We have been doing it for almost 5yrs now.
#5
Posted 27 June 2017 - 08:20 AM
Why can't you go ahead and put the screw in the full barrel now? Its not an issue. If you are worried that it will leak around the screw have some beeswax handy, but you won't need it.
I agree with this. It will not leak and if it does it will only be for a bit before it swells.
#6
Posted 27 June 2017 - 10:03 AM
But thanks for the tips. I will get this sorted.
#7
Posted 27 June 2017 - 10:55 AM
Go ahead and use a pipet then.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users